When a ship carries a solid bulk cargo with chemical hazards and packaged dangerous goods on the same voyage, 7.6.3.5 of the IMDG Code sets the segregation between the two. The table below applies unless the IMDG Code or the IMSBC Code requires otherwise (7.6.3.5.1). The requirement is in chapter 7.6, which covers stowage and segregation on general cargo ships. The same table, with the same entries, is 9.3.3 of the IMSBC Code, where the bulk cargoes concerned are those of group B: dangerous goods in solid form in bulk and materials hazardous only in bulk (MHB).

The IMSBC Code references here are to Amendment 08-25, adopted by resolution MSC.575(110). It may be applied on a voluntary basis from 1 January 2026 and enters into force on 1 January 2027.

Segregation table: 7.6.3.5.2

Rows are the bulk material. Columns are the class of the dangerous goods in packaged form. The numbers are segregation terms, defined below the table, not hazard ratings. On a phone, scroll the table sideways to see all the classes.

Bulk material (classified as dangerous goods)Class1.1
1.2
1.5
1.3
1.6
1.42.12.2
2.3
34.14.24.35.15.26.16.2789
Flammable solids4.1432222X1X12X321X
Substances liable to spontaneous combustion4.24322221X1221321X
Substances which, in contact with water, emit flammable gases4.34422X2X1X22X221X
Oxidizing substances (agents)5.14422X2122X21312X
Toxic substances6.122XXXXX1X11X1XXX
Radioactive material722222222212X3X2X
Corrosive substance84221X111122X32XX
Miscellaneous dangerous substances and articles9XXXXXXXXXXXXXXXX
Materials hazardous only in bulk (MHB)XXXXXXXXXXXX3XXX

What the numbers and X mean

EntryTermDefinition in 7.6.3.5.3
1Away fromEffectively segregated so that incompatible materials cannot interact dangerously in the event of an accident. They may be transported in the same compartment or hold, or on deck, provided a minimum horizontal separation of 3 m, projected vertically, is provided.
2Separated fromIn different holds when stowed under deck. Provided an intervening deck is resistant to fire and liquid, a vertical separation, that is in different compartments, may be accepted as equivalent.
3Separated by a complete compartment or hold fromEither a vertical or a horizontal separation. If the decks are not resistant to fire and liquid, only a longitudinal separation, by an intervening complete compartment, is acceptable.
4Separated longitudinally by an intervening complete compartment or hold fromVertical separation alone does not meet this requirement.
XNo general requirement in the tableThe segregation, if any, is shown in the Dangerous Goods List of the IMDG Code or in the individual entries of the IMSBC Code.

X means the table sets no general requirement for that combination. It does not say that segregation is unnecessary, and it does not create a requirement of its own. Any requirement comes from column 16b of the Dangerous Goods List for the packaged goods and from the IMSBC Code schedule for the bulk cargo. Where neither prescribes segregation, none arises from X.

Reading the table

Bulk materialPackaged dangerous goodsTable entrySegregation
Class 5.1 in bulkClass 3 flammable liquids2Separated from
Class 5.1 in bulkDivision 1.1 explosives4Separated longitudinally by an intervening complete compartment or hold from
Class 4.1 in bulkClass 8 corrosives1Away from
Class 8 in bulkClass 6.1 toxic substancesXSee the Dangerous Goods List and the IMSBC Code entry
MHBClass 6.2 infectious substances3Separated by a complete compartment or hold from

For materials hazardous only in bulk, class 6.2 is the only column with a number. Every other MHB entry is X.

Where the IMSBC schedule changes the answer

The table gives the general requirement between whole classes. The individual schedule of the bulk cargo can add to it, as these three IMSBC Code schedules show.

Bulk cargo (IMSBC schedule)Packaged goodsTable entryStowage and segregation in the scheduleResult
AMMONIUM NITRATE UN 1942 with not more than 0.2% total combustible material, class 5.1Class 3 flammable liquids2“Separated by a complete compartment or hold from” combustible materials (particularly liquids). “Separated from” all other goods.The schedule is stricter than the table: term 3 instead of term 2.
AMMONIUM NITRATE UN 1942, class 5.1Class 9X“Separated from” all other goods.The schedule prescribes term 2 where the table shows X.
FERROSILICON UN 1408 with 30% or more but less than 90% silicon (including briquettes), class 4.3, subsidiary hazard 6.1Class 8 liquids1“Separated from” foodstuffs and all class 8 liquids.The schedule is stricter than the table: term 2 instead of term 1.
SULPHUR UN 1350 (crushed lump and coarse grained), class 4.1Class 81“Separated from” foodstuffs.The schedule adds nothing for class 8. The table entry stands: term 1.

In each case the packaged goods’ own entry still has to be checked: column 16b of the Dangerous Goods List may add a requirement for a particular UN number. A schedule requirement applies to the materials it names. The sulphur schedule’s “separated from” foodstuffs does not extend to packaged class 8.

Points to watch

PointDetail
The terms have their own definitions here7.6.3.5.3 defines the four terms for bulk against packaged goods. “Away from” carries a 3 m minimum horizontal separation.
Decks resistant to fire and liquidTerms 2 and 3 allow vertical separation only where the intervening deck is resistant to fire and liquid.
Individual entries come firstThe table applies “unless otherwise required in this Code or in the IMSBC Code”. The IMSBC Code words it as “unless otherwise required in this section or in the individual schedules”. Check the IMSBC Code schedule of the bulk cargo and columns 16a and 16b of the Dangerous Goods List for the packaged goods.
Subsidiary hazardsSegregation shall also take account of any identified subsidiary hazard (IMSBC Code 9.3.1.1). Where the bulk cargo or the packaged goods have a subsidiary hazard, do not rely only on the primary class shown in the table.
Hold and compartmentFor segregating incompatible materials, “hold” and “compartment” mean a cargo space enclosed by steel bulkheads or shell plating and by steel decks, with boundaries resistant to fire and liquid (IMSBC Code 9.3.1.3).
Cargo handlingIncompatible materials shall not be handled simultaneously. After loading one cargo, the hatch covers of every cargo space are closed and the decks cleaned of residue before loading of other material begins. The same applies when discharging (IMSBC Code 9.3.1.7).
Bulk against bulkTwo or more group B bulk cargoes are segregated under IMSBC Code 9.3.4, not this table.
Packaged goods against packaged goodsThis table is not used. Use the general segregation table in 7.2.4 and the ship-type chapters.

Based on IMDG Code Amendment 42-24 and IMSBC Code Amendment 08-25. Revised 14 November 2026.


Discover more from IMDG Code Compliance Centre

Subscribe to get the latest posts sent to your email.

By Shashi Kallada

35 years in Merchant Shipping, Last 23 years working on IMDG Code. Ex Sailor, Ex Manager Global Dangerous Goods Maersk Line.

Leave a Reply

Discover more from IMDG Code Compliance Centre

Subscribe now to keep reading and get access to the full archive.

Continue reading